GreatCarve Scratch Acrylic - Sky Blue/White - 11.8" x 9.45"
- Easily cut and engraved
- Ultra-fine laser lettering
- Durable surface
- Not easy to leave fingerprints
- Dimension: 11.8" x 9.45" x 0.05"
Processing Time: 1-3 business days (Mon-Fri)
Standard Delivery Time: 5-10 business days (Mon-Fri)
GreatCarve Scratch Acrylic - Sky Blue/White - 11.8" x 9.45"
Scratch Acrylic
- Color: Sky Blue/White
- Dimension: 11.8 inches x 9.45 inches x 0.05 inches (300mm x 240mm x 1.5mm)
- The product offers a crisp, clean image and ultra-fine laser lettering, with a durable surface that resists fingerprints.
- The scratch acrylics can be easily cut and engraved by laser machines, even the 5 watts engravers
- 1 Test Card
Easy to Cut and Engraver
The Scratch Acrylic is easy to cut and engrave with a laser cutter. These laser blanks for laser engraving machines leave clean edges without burrs. It is perfect for engraving material and laser engraver accessories.
Multiple Applications
Our two-layer, two-color panels are versatile and suitable for a variety of applications including indoor and outdoor signage, badges, awards, and industrial signage. This material is perfect for tabletop artwork, wall decorations, gift decorations, business cards, or outdoor signage for retail merchandise. With these acrylic materials and lasers, it only takes imagination and creativity to bring your ideas to life.
- Dual-layer colorful scratchable acrylic
- The product offers a crisp, clean image and ultra-fine laser lettering, with a durable surface that resists fingerprints.
| Color | Navy Blue/White | Sky Blue/White | Venice Purple/White | Red/White | Black/White |
| Size | 11.8 inches x 9.45 inches | 11.8 inches x 9.45 inches | 11.8 inches x 9.45 inches | 11.8 inches x 9.45 inches | 11.8 inches x 9.45 inches |
| Laser Cutting | ✓ | ✓ | ✓ | ✓ | ✓ |
| Laser Engraving | ✓ | ✓ | ✓ | ✓ | ✓ |
Manual measurement, the error may around 10 millimeters.
- This product could be compatible with all engraving machines
How to store laser materials correctly?
The panels should be stored horizontally and flat.
The storage location should be dry and weatherproof (indoor).
Average-temperature rooms without large fluctuations in room temperature and air humidity.
The material should not be exposed to direct sunlight, as the protective film can become porous if too much heat is generated.
Too long storage can have a negative effect on the protective film.
How do I reduce the dust generated during engraving or cutting?
It is recommended to set the parameters to engrave effectively through the color surface while only as little as possible is removed from the core material. Also, using a vacuum table and exhaust system to remove the dust generated effectively.